The VERDI BASIC is one of the INGLET CUTTERS allowing cuts up to 305 cm and 22 mm maximum thick on rigid panels such as: Aluminium composite panels, foamed PVC, acrylics, MDF, wood, methacrylate and so on. Comes standard equipped with a saw blade for general uses.

VERDI BASIC 122 and VERDI BASIC 157:

• VERDI BASIC 122 and  VERDI BASIC 157 are semi-automatic.
• Cutting capacity: 122 cm and 157 cm respectively.
• Both vertical saws come with 1 cutting head, equipped with a saw blade (250 x 30 mm / 80 teeth), allowing cuts on rigid panels up to 22 mm thick.
• The cutting head turns at  2.700 RPM, and the advancement is manual.
• VERDI BASIC 122 and VERDI BASIC 157 need a 2 HP dust collector (item 02 12 06) which is not included.

VERDI BASIC 244 and VERDI BASIC 305:

• VERDI BASIC 244 and VERDI BASIC 305 are fully automatic.
• Cutting capacity: 244 cm and 305 cm respectively.
• Both vertical saws come with 1 cutting head, equipped with a saw blade (250 x 30 mm / 80 teeth), allowing cuts on rigid panels up to 22 mm thick.
• The cutting head turns at 2.700 RPM, and the advancement is fully automatic.
• VERDI BASIC 244 and 305 have a stop control device to allow the cutting head stop wherever all allong the travel. This is a useful engine to save-time when cutting small sizes.
• VERDI BASIC 244 and 305 come with an advancement speed regulator, to adjust each material to the required speed.
• VERDI BASIC 244 and VERDI BASIC 305 vertical saws need a 2 HP dust collector (item 02 12 06) which is not included.

ACCESSORIES:

• Turn your VERDI BASIC into a VERDI TWIN by adding the cutter accessory! 
• Install a LASER on the top to draw the cutting line.
• Add an ARM EXTENSION (1 m with millimetric scale) for oversized panels.
• Add as extra MEASURING TAB as needed to settle different sizes.

Add a pneumatic cutter accessory to your VERDI BASIC to turn it into a VERDI TWIN!! This way your INGLET CUTTER will have 2 cutting heads to cut multi substrates without need of changes, adjustaments or tools!!!